How Is CBD Oil Made

CBDISTILLERY

Buy CBD Oil Online

Have you ever wondered how exactly CBD Oil is derived from the hemp plant? This article will walk you through step-by-step just how CBD comes from hemp. As you may well know, CBD oil is made from hemp. Crude oil is extracted, refined and thoroughly tested – this is how Good Hemp’s pure CBD oil is made. Cannabis oil. CBD-rich cannabis oil can safely be extracted using the methods listed here.

How CBD Oil Is Made: A Step-By-Step Overview

CBD popularity has exploded. According to SingleCare, 33% of American adults have tried CBD. With over a third of Americans giving the supplement a try, many may wonder where the popular supplement comes from.

First, before diving into how CBD is made, let’s clear up the confusion between hemp and marijuana. Both hemp and marijuana are forms of cannabis, but in order for a plant to be classified as “hemp” it needs to be grown under a hemp program and is required to contain less than 0.3% THC. Contrarily, “marijuana” plants contain more than .3% THC and are grown in recreationally or medically legalized states.

Because hemp contains less than .3% THC, it is non-psychoactive. Other than CBD, hemp has traditionally been used for centuries as a material for rope, fibers and textiles. We lay it all out in our History of Hemp article.

Populum’s CBD oil is made from refined hemp extract that has been combined with a carrier oil. Read through this to learn the step-by-step process on how CBD is made.

Step 1: Planting The Hemp Plant

Before the hemp seeds are sowed into the ground, the soil is prepared and tested for herbicides. Hemp is a pretty wonderful plant because each crop can be planted very closely together – as close as four inches! This allows for a greater yield with less land use. Hemp is an excellent resource for regenerative agriculture because it can be used in crop rotation to help put nutrients back into the soil. Hemp produces high quantities of biomass (a matter which returns to the soil and decomposes, feeding nutrients back into the ground).

According to Farm Journal, plant hemp typically falls between the third week of May and into the first week of June. Once planted, the hemp grows rapidly, sprouting up in 60 days. Cannabis Reports listed the states with the most hemp produced to be Montana, Colorado, Kentucky, North Carolina, Oregon and Minnesota.

Hemp is not a plant that is limited to just one region of the United States!

Feel Better with Populum CBD

The best CBD oil you can buy, backed by 900+ verified reviews. Try risk-free for 30-days.

Step 2: Harvesting The Hemp Plant

It all starts with the flowers of the hemp plant. The cannabinoids are most commonly concentrated in the resin glands of the trichome of the plant.

The plants are usually harvested around October, depending on the climate of the state. Before they can officially harvest, a sample of each crop is tested and cleared by the state’s department of agriculture. This is to assure that the farm is following federal regulations, keeping their hemp at

For instance, Populum works with farmers in eastern Colorado that are licensed by the Colorado Dept of Agriculture and follow organic farming standards, which ensures that no pesticides or heavy metals are present near the plants.

Once harvested, plants are put up to be cured, or air dry in a well ventilated area. This curing process takes 3-4 weeks. Once dried, the flowers, where you can find the strongest concentration of cannabinoids, are stripped from the plants and then shipped to manufacturers that then extract the cannabinoids.

Step 3: Extracting the CBD from the Dried Hemp Flower

Extraction is the process of removing the CBD extract from the hemp plant to turn it into a usable form for ingestion or topical application. Each extraction method results in a slightly different end result, but depending on how it’s extracted, the raw extract will have a thick oily texture with a very dark, almost black, hue.

There are different extraction methods and each has its own pros and cons. Here’s a short list of the top extraction methods available:

  1. Ethanol Extraction:
    1. This method involves soaking the plant in high-grain alcohol in order to extract the CBD oil. Ethanol extraction is now one of the most common methods of today’s high-quality natural extractions and is gaining traction as one of the most effective on the market.
    1. CO2 extraction uses carbon dioxide to isolate cannabinoids under extremely low temperatures. Super-cooled and condensed carbon dioxide cools and then extracts CBD oil without leaving any chemicals or residue behind. This process requires robust equipment, but yields a safe and potent end product.
    1. Another method is the oil method, which is popular with at home and do-it-yourself folks. In this method, the hemp plant is heated and cooked in a carrier oil such as olive oil which extracts the desired cannabinoids.

    Populum uses a two-step extraction methodology that combines Food-Grade Ethanol Extraction and a Fractionalized Distillation. This method cleans the oil of all waxes, lipids, and chlorophyll, to create a true full-spectrum oil that includes both high levels of cannabinoids and terpenes.

    Step 4: Creating CBD Oil & Topicals

    Once CBD is in its purest form and extracted from the plant, it is combined with other ingredients such as flavoring and carrier oil. For example, Populum uses a special blend of grapeseed, hemp seed and orange oil. Oils such as hempseed or coconut (MCT) oil make for excellent carriers for full-spectrum CBD. This is due to its natural abundance in saturated fats. Natural saturated fat molecules are easily absorbed by the body and directly through the liver. This allows for the body to get the most CBD absorbed into the bloodstream as possible. Populum also uses cold-pressed orange oil in their CBD oil for a light orange taste, which helps negate the “hempy” or “earthy” taste many hemp oils have.

    Step 5: Lab Testing & Packaging

    Populum undergoes third-party testing with each of its batches of CBD. A sample from each batch is sent to a lab, where it is tested for purity and potency. Third-party testing is the differentiator between good quality CBD products and products that could be anything labeled as CBD. This extra process in production makes all the difference when it comes to making a quality product.

    The entire process of producing a quality CBD oil takes several steps, but having a direct and clear supply chain helps yield quality end products. Brands who are transparent about their methods of production and consistently third-party test their products are often the brands providing the best oils on the market. The CBD industry has a long history, but within the past few years the technology advancements have made way for a better end product. Better production methods and continued innovation means CBD oil can make its way to more and more people and bring healing into the lives of many.

    How is CBD Oil Made? The Process Explained

    Here at Good Hemp, we’re all about transparency in everything we do – that way we keep ourselves honest and you can hold us accountable! We want the production process of our pure CBD oil to be as sustainable as possible so that the planet doesn’t have to suffer – but we know we aren’t perfect (yet) either.

    Good Hemp Pure CBD Oil

    250mg Citrus CBD Oil

    250mg Natural CBD Oil

    250mg Peppermint CBD Oil

    Natural 1000mg CBD Oil

    Natural 2000mg CBD Oil

    For example, due to outdated and restrictive legislation, growing hemp in the UK is legal if you have a licence to grow it as a controlled substance, but the most valuable parts of hemp – the high-CBD leaves and flowers – have to be destroyed onsite.

    That’s right. British farmers are allowed to grow hemp for the purposes of making hemp oil, hemp seed hearts, construction materials… but not CBD oil.

    That’s why at the moment the hemp we use for our pure CBD oils is derived in the USA, where the extraction of CBD oil from hemp leaves and flowers is permitted. We’d like to improve our supply chain, however, to rely less on hemp being shipped across long distances – so we’re hoping that the UK government changes their restrictions ASAP. The pictures below are of our farm in Devon where we grow hemp for seeds and fibre, however not CBD. But hopefully they give you an idea of what the growing and processing of hemp looks like!

    How Our CBD Oil is Made Today

    Today, we do what we can to keep our CBD oil production process as sustainable as possible while we focus on producing a 100% natural and pure CBD oil product. Not a single fertiliser, insecticide or toxic chemical is involved in the growth of our non-GMO hemp, and the thorough CBD extraction and testing process ensures that we get the strength, contents and dosages of our CBD oil products just right every time.

    Join us as we walk you through the journey our hemp goes through from seed to CBD.

    1. Soil prep

    At the very start of the hemp growing process the soil is prepared through the process of tilling; drainage lines are installed to help increase yield by ensuring that the soil doesn’t become saturated. The dirt is then broken up with approximately 12-18” deep grooves that the seeds will be sown into.

    Between annual hemp cycles, a different crop is grown in the same area so that the soil doesn’t become exhausted of one particular set of nutrients. This reduces the need for synthetic fertilisers when growing other crops, and as hemp cleanses the soil, it’s a crop-rotation favourite.

    2. Sowing

    Around March, when the frosty weather has passed, seeds are sown into the grooves that have been made in the soil. The sowing is done by machines, and the results are quick: seeds will typically show signs of growth in as little as 24 to 48 hours, with plantlets growing to be two feet tall after four weeks’ time!

    Again, no fertilisers, insecticides or any other form of chemical fortifying is required for our natural hemp to cultivate. The natural rain water and the condition of the soil are sufficient for steady growth and great plant health.

    3. Cultivation

    The growth cycle for hemp flowers is around 6 months (it’s less for seeds), which means that they can be harvested around August/September time. The cultivation process of our hemp is fairly easy, as the sturdy naturally adjusts to changes in the weather and environment (god it’s good…)

    4. Harvesting

    Much like Goldilocks’ finickity standards, for hemp to be harvested correctly, the conditions have to be juuuuust right. It can only be completed once the plants are fully grown, the yummy hemp seeds have been harvested, the conditions are dry without any excessive humidity or rain, and sacrifice has been made to the hemp gods. Ok we’re joking about the last one, but you get the jist – it’s not easy.

    Head hemp farmers will monitor these requirements closely and choose the right time to harvest them. This is done by a funky type of combine harvester which has a huge crop wheel at the top, collecting the leaves and flowers, and a lower component which slices the 3m tall hemp stems at the base. The stems are collected separately and used for their fibre, while we steal the flowers and leaves for CBD.

    5. Drying

    Once it’s been harvested, the hemp is dried and in a temperature- and humidity-controlled environment. Depending on its quality, the hemp is either selected for cannabinoid extraction – the final product being our pure CBD oil – or sold to be used as a herbal tea.

    6. Testing for CBD quality and contamination

    Next the graded hemp material is tested for quality, purity and overall safety. This includes testing the dried material for cannabinoid content, mould and toxins or any other unwanted compounds. If the test results come back as we want them, the material is put forward for CBD extraction.

    7. Supercritical CO2 extraction

    The CBD extraction starts with the ‘supercritical CO2 extraction’, in which pressurized carbon dioxide (CO2) is used to pull the entire profile of cannabinoids, waxes, fats and terpenes from the hemp plant. This CO2 extraction process doesn’t require any solvents, which means it’s a very clean process. The supercritical CO2 extraction results in a full-spectrum extract, from which the cannabinoids will be refined further to create CBD isolates.

    8. CBD extraction

    By using distillation methods, all controlled substances – including THC and other unwanted compounds – are removed from the crude oil to leave a broad-spectrum hemp extract that’s free of THC. Next, the extract is further refined to a pure CBD isolate through an isolation process called reverse chromatography (RC). RC totally isolates the CBD with hardly any contaminations, ensuring that the CBD oil you buy contains 99.9% pure CBD.

    9. HPLC testing

    This is where it gets very science-y. You’ve been warned.

    To ensure that the CBD remains pure and the isolation has been successful, it’s tested thoroughly through a fancy-sounding process called ‘high-performance liquid chromatography’ or HPLC. This involves a pressurised liquid solvent containing the CBD sample being pumped through a column filled with a solid adsorbent material. As each component of the sample interacts slightly differently with the absorbent material and exits at different flow rates, the HPLC process will separate and identify each of the compounds of the original CBD sample. The result? A clear and precise overview of the exact value of CBD and any other molecules present.

    10. Final formulations

    Once our pure CBD has been tested for purity and quality, it’s time to make the final formulations. Each of our CBD products is mixed with organic, cold-pressed hemp seed oil to, creating a range of strengths (based on the ratio of CBD to hemp seed oil). On top of that, our peppermint- and citrus-flavoured oils are infused with clean, steam-distilled, plant-derived terpenes that give them their delicious flavour and aroma.

    11. Testing by third-party laboratories

    The last stage of testing that our CBD oil undergoes is typically on the final formulations. Each batch we produce is meticulously tested by third-party laboratories for its cannabinoid content to ensure that the purity and quality remain accurate to each strength and ratio.

    Once all lab reports are returned satisfactorily, the CBD oil is ready to be packaged and labelled, ready to be shipped off to you guys!

    You can find our full range of CBD drops, starting at £15, here . To read more about CBD, what it does and why it’s great, head to The Spill .

    At Good Hemp, we want to make the benefits of CBD oil available to all. Whether you use CBD to relieve the symptoms of anxiety, depression or pain , we’ve got your back. We take pride in producing pure CBD oil that comes with all the benefits to your health and wellbeing without any of the unwanted side-effects, artificial compounds or harm to the environment.

    How CBD Oil Is Made

    To extract CBD -rich cannabis oil, one must start with CBD -rich plant material. There are many ways to extract oil from the cannabis plant, each has its pros and cons. Some methods are safer and more effective than others. Cannabis oil made with neurotoxic solvents like butane and hexane may leave unsafe residues that compromise immune function and impede healing.

    • CO 2 extraction. The supercritical (or subcritical) CO 2 method uses carbon dioxide under high pressure and extremely low temperatures to isolate, preserve, and maintain the purity of the medicinal oil. This process requires expensive equipment and a steep operational learning curve. But, when done well the end product is safe, potent, and free of chlorophyll.
    • Ethanol. High-grade grain alcohol can be used to create high-quality cannabis oil appropriate for vape pen cartridges and other products. But this extraction method destroys the plant waxes, which may have health benefits that are favored by some product-makers.
    • Olive oil. Extra virgin or otherwise, olive oil can also be used to extract cannabis oil. Dr. Arno Hazekamp, director of phytochemical research at Bedrocan BV , which supplies medical cannabis for the Dutch Health Ministry, reports this method is both safe and inexpensive, “You won’t blow yourself up making cannabis-infused olive oil.” However, cannabis-infused olive oil—whether CBD -rich or THC -dominant—is perishable and should be stored in a cool, dark place.

    Medical patients swear by it. Researchers are intrigued by it. Government regulators are flustered by it. And investors are head over heels for it. But what exactly is CBD oil?

    Vaporizer pens are a trendy and discrete manner to vaporize cannabis medicine. However, commonly used thinning agent in many products on the market are harmful when heated and inhaled.

    Look for products with clear labels showing the quantity and ratio of CBD and THC per dose, a manufacturing date, and a batch number (for quality control). Select products with quality ingredients that are lab tested and safely extracted.

    How useful was this post?

    Click on a star to rate it!

    Average rating 4 / 5. Vote count: 1

    No votes so far! Be the first to rate this post.

See also  CBD Oil Edmonton