Overseeding Your Lawn – 11 Tips That Actually Work
Overseeding is the process of applying grass seed over an existing lawn. The experts all agree that regular overseeding is vital to help thicken your lawn and fill in bare spots, which reduces or eliminates competition from weeds. The reasoning is that young grass will produce new growth faster than older grass. After several years, mature plants begin to slow down their reproduction rate. With that in mind, I’ve found the following tips extremely helpful in successfully overseeeding (and re-seeding from scratch for that matter). It is certainly frustrating to go through all the work and expense of seeding an area, only to have the results be less than satisfactory. Follow these tips and you’re virtually guaranteed to succeed!
1. Start by Cutting Your Lawn Low
Before you begin overseeding your lawn you should mow your lawn at a low setting and bag the clippings. Don’t set it so low that you scalp your lawn, but as low as possible.
2. Make sure the Seeds are in Contact With the Soil
Seeds must come into direct contact with the soil in order to germinate. Research shows that if seed is laid on top of old grass, you will have about a 2% germination rate. Vigorously rake the existing grass, then add a shallow layer (around 1/4”) of topsoil to the yard prior to seeding. Consider renting a slice seeder if you’re over-seeding a large area.
Once this is done, and your seed is applied, I recommend applying a thin layer of peat moss to the soil to very slightly cover the seed and help in retaining moisture. Peat moss also provides a number of residual benefits to your lawn, such as the improvement of aeration. Since it’ comprised of organic material it also adds nutrients to your lawn’s soil. Some people recommend using straw to cover the seed, however straw is unsightly, doesn’t decompose quickly, or retain as much moisture, and is known to introduce weeds.
3. Make Sure the Seeds get Enough Sun
Seed also needs exposure to sunlight. A heavy cover of straw, soil, or other material will cause the seeds to rot, or severely limit germination. Cover seeds with no more than 1/4” of top dressing.
4. Keep Your Trees Judiciously Pruned
Most lawn grasses prefer full sun (around 6 hrs per day) and don’t do well in shade. To help your new grass thrive, consider giving your trees a liberal pruning. A thinner, higher canopy will allow more light and rain to reach your grass, and go a long way towards helping your grass grow.
I have a large Red Maple in my front yard that hadn’t been pruned in ages. There was literally no grass growing under it by virtue of how much shade the tree was creating. And that’s with Southern exposure. After aggressively pruning it, not only does the tree look much better, the grass underneath is now thriving.
5. Keep the Seed Wet, But Not Too Wet
Water is an important factor in successful seeding, and the step that usually takes the most work. The newly seeded areas must be kept constantly moist for weeks. Allowing the soil to dry out even for an hour during the critical germination phase can result in seedling death. This may require that you give the seeded areas a light watering two to three times a day for the first few weeks. After that, you will still need to keep the seedlings watered on a regular basis. At this stage you should water less frequently, but a little deeper. Be careful not to soak the soil repeatedly or you could encourage root rot diseases. As the grass grows, allow the soil to dry slightly before watering again. See my article on watering for more information.
The soil should feel moist but not muddy. Obviously doing this much watering by hand wouldn’t be practical, so I highly recommend getting a timer. This one from Amazon is the best one out there. See my article on irrigation.
6. No Herbicides or Weed Control
The number one enemy of newly seeded lawns are herbicides. Make sure that no weed control or weed prevention chemical has been used in the area, as those products will also prevent or inhibit germination. When used on very new lawns, herbicides will kill off the new grass.
7. Choose the Right Time of Year
Choosing the right time of year is all about soil temperature. Make sure the ground is warm enough, but not too warm. Temperature plays a critical role in seed germination. Soil temperatures must be at least 55 degrees Fahrenheit (13 degrees Celsius) for northern type turf grass seed to germinate (Bluegrass, ryegrass, fescue). Air temperature must typically be between 60 and 80 degrees Fahrenheit (15-26 degrees Celsius). Southern seed types (bermudagrass, zoysiagrass, bahiagrass, etc) need soil temperatures of at least 70 degrees Fahrenheit (21 degrees Celsius), with air temperatures in the 80’s or higher (21 degrees Celsius or above). Seeds will not germinate if the temperatures are cold at night, or are fluctuating from high day temperature to very low night time temperatures. Very hot weather will also inhibit seed germination.
In most areas, grass seed is best planted before or after summer. That’s primarily because it’s almost impossible to keep new seed moist in the summer without nearly constant watering. The other problem with summer planting is that the soil prep work opens up the area to weed seeds, which readily germinate in the heat.
Throughout much of the northern half of the U.S and Canada, early fall is the best time for sowing grass. The soil is warm, but daytime temperatures are moderate, making watering less of a problem, and the weeds are less likely to grow. I like to start seeding at the earliest first week of September and will push into the first week of October if I have to. By late October, the new grass should be thick and strong enough to survive the winter. Keep in mind that a newly seeded lawn will need one full growing season before it’s mature and well-established.
Sometimes seeding in the Spring is unavoidable. I usually have a few spots that need touching up every spring. In this case, keep a close eye on the soil and air temperatures before getting started. Sometimes the window is small before it gets too hot.
8. Apply a Starter Fertilizer
I recommend applying a starter fertilizer when you sow the seeds, and then add more fertilizer three to four weeks later. That’s necessary because all the watering you do to make the seedlings grow actually pushes the first application of fertilizer out of the top layer of soil, putting it beyond the reach of the young roots.
9. Don’t Mow Too Early
Once the surrounding grass starts to grow it’s tempting to get the mower out, however, you need to wait until the seed germinates and reaches at least two inches. It may take two to three weeks, depending on the seed type. If you mow before the seed germinates, you run the risk of picking up loose seed, and killing small seedlings with the lawn mower. Similarly, you should limit activity on the lawn – walking on it, etc, in order to allow the seeds to reach full germination.
10. Watch Carefully for Grubs and Other Problems in the First Year
If you’re re-seeding a large area keep in mind that a newly a seeded lawn will need at least one full growing season before it’s mature and well-established. During this period it is much more vulnerable to pests, weeds, and diseases. I had the misfortune of having a grub infestation in my first summer following seeding. By the time I realized, a large amount of damage had already been done, since the grubs eat the roots. The birds and other animals digging up the grubs just made the situation worse. I would recommend considering applying nematodes preemptively in the first summer following seeding. They don’t cost very much and can save a lot of heartache. As happened to me, often by the time you realize you have an infestation, the damage has been done.
During this first year, also pay extra attention to pulling weeds. If the grass hasn’t fully grown in there’s a good chance that you’ll have more weeds than normal since the ground has been cultivated and made ideal for germination.
11. Finally, Choose the Right Seed
Before overseeding a lawn, it is important to choose a seed that is compatible with your grass and climate/growing zone. You should try to use a seed that is as similar as possible to your existing grass. See my article on Grass Types. Selecting the right type of grass is key, and planting a variety of species helps your lawn become established as the seeds’ strengths and weaknesses offset each other. In general, mixtures are more likely to survive adverse weather conditions, like heat and drought, than a single-seed lawn. My go-to seed is Scott’s Sun and Shade mix (check price on Amazon)
Be careful about using bargain store seed brands for overseeding lawns. Bargain seed is often poor quality and can contain multiple undesirable varieties.
Reading a Seed Bag Label
Here’s what each of the important label elements mean:
A. Pure Seed: Look for a blend of two or more varieties. A single variety is more susceptible to being wiped out by disease.
B. Variety: Every common grass, should have a variety name. If no variety name is listed, it’s a lower quality seed.
C. Other Crop Seed: These are annual grasses, such as wheat or rye. Be wary if there’s more than 2.5 percent.
D. Inert Matter: This is the stuff that won’t grow, such as dirt and stale seeds. More than 3 percent is a red flag, unless it’s a seed coating meant to enhance germination.
E. Weed Seed: No bag is completely weed-free, but avoid ones with more than 0.2 percent of these seeds.
F. Noxious Weeds: The best bags will have none of these.
G. Tested: Like an expiration date. Walk away from bags with a test date more than one year old.
In conclusion, overseeding is a vital lawn practice to maintaining a thick, healthy lawn. Follow these simple steps and you’ll never dread seeding again! Good luck and happy seeding. Let me know in the comments below if you have any suggestions you think I should add or amend.
Check out all of my recommended seeding gear here!
Here is a before and after picture of my front lawn re-seeding/overseeding. Half of it was re-seeded, the other overseeded. The transformation was amazing.
Top Dressing Lawn: Benefits and Advice
It happens to the best of us. Despite your best efforts, some years your lawn just goes to complete junk.
A lot of times things may look good in the spring, but as the heat of the summer sets in you can be overwhelmed with problems.
Weeds, fungus, grubs, and heat stress, can attack your lawn, and your sanity. As defeating as this can be, there is plenty of reason to be hopeful.
The cooler weather is around the corner and that means it’s the perfect time to top dress your lawn.
Top dressing your lawn, especially when combined with core aerating and overseeding, is the best way to renovate your lawn.
What Is Lawn Top Dressing?
Top dressing is the process of spreading a thin layer of material (usually compost or sand) over your lawn, or sections of your lawn. This layer is only about a 1/4″ and is meant to amend the soil of your lawn while letting the existing grass grow through the top dressing material.
It is important to be clear that when top dressing your lawn you don’t want to cover your lawn in a thick layer that suffocates it.
Instead, you are looking to improve soil conditions for your existing lawn while providing a good environment for new seed to germinate.
Benefits of Top Dressing
1. Improves Soil- Top dressing adds nutrients to your lawn organically and improves drainage.
2. Breaks Down Thatch- The top dressing material helps to break down the thatch layer in your lawn.
3. Levels Lawn- If you have areas of your lawn that are bumpy top dressing is a great way to smooth out these areas.
4. Helps Seed Germinate- If overseeding your lawn, top dressing allows seed to make direct contact with soil which is best for germination.
5. Helps In Renovating Distressed Lawn- If there are bare spots in your lawn, or if your lawn is being crowded out by weeds, top dressing is your best bet for correcting soil conditions and incorporating new seed.
Top dressing is even more effective when done after core aerating.
When Is the Best Time to Top Dress
The best time to top dress your lawn is when it is actively growing and you are heading into prime growing conditions.
For cool season grasses late summer/early fall is best.
You hear a lot of talk about fall being a good time to seed your lawn, but in colder climates you have to be careful. In some regions if you wait until fall, the soil temperatures will likely be too cool for germination.
For warm season grasses the best time to top dress is early summer. This is when warm season grasses begin to take off.
How to Top Dress a Lawn
1. Test Your Soil- If you’re thinking of top dressing your lawn, chances are you had some lawn issues come up. Now is a great time to do a soil test to make sure you correct any nutrient deficiencies or to see if your lawns ph needs a tweak.
2. Kill Lawn Weeds- A couple of days before you top dress, go around your lawn and spot treat any weeds using a good herbicide that kills weeds without killing your lawn.
3. Dig Out Bad Sections- If you have any areas of poa, bentgrass, or other clump forming nuisance grasses then it is best to manually dig these out using an edging shovel. These grasses can be tough to control with herbicides.
4. Purchase Quality Material- Purchase quality compost to add nutrients to your lawn. Purchase coarse sand if you want to add drainage. You can also mix compost and sand together to receive the benefits of both.
Make sure you don’t get a screened sand with a lot of fines, it could actually make your drainage problem worse.
Don’t skimp out and try to save money on this step. The whole reason you are doing all this work is to amend your lawns soil, so make sure you are doing so with a quality product.
5. Make Small Piles- Fill your wheelbarrow with your material and dump a bunch of small piles over your lawn. Dumping small piles will make it a lot easier to rake out later on and ensure that you are creating a thin layer.
6. Rake In Piles- Any rake should do the job but an aluminum landscape rake is best since it does the best job of creating a smooth layer. This is especially useful if you are trying to smooth out a yard that is bumpy.
Be sure to break up any clumps of compost and make sure you thoroughly rake out each area so it is no more then a 1/4” thick. There should be plenty of grass visible once your material is raked in.
7. Apply Starter Fertilizer- Apply a starter fertilizer. Starter fertilizers have a higher middle number which is phosphorus. Phosphorus helps in root growth and early development.
When applying fertilizer use a good broad cast spreader and apply twice in opposite directions. Just make sure you decrease the settings on your spreader accordingly.
For example if the bag of fertilizer says to set your spreader at a 3.5 then I set the dial to a 2 (rounding up) and apply twice in opposite directions. For a better understanding of fertilizer application rates check this out: Fertilizer Application
8. Apply Seed- After applying your starter fertilizer it’s time to apply your seed. Once again, use a broadcast spreader and apply twice in opposite directions.
Do some research before just purchasing any bag of seed.
Here in the northeast, you can’t go wrong using this northeast mix. It is definitely not the cheapest, which is good. You don’t want the cheapest! Stay away from the cheap stuff, especially anything that says contractors mix.
9. Irrigate- Don’t forget to setup irrigation! If you don’t have an irrigation system then check out this battery operated irrigation controller. You can schedule them to come on multiple times a day.
You can set up to 4 zones per controller and get atleast 2 sprinklers per zone. This will cover a lot of square footage and get you out of moving sprinklers all day.
The early to late summer weather can be unpredictable. Really hot days can pop up. Be sure to monitor the weather and plan for these hot days. New seed needs to be constantly damp to germinate.